西藏日喀则拉堆-乃东与毕定-甲舍拉断裂的活动性分析研究          下载免费PDF全文

雷生学  李振海  张文朋  陈宇坤  郭巍  谢静博  高也  高锦瑞 《地震工程学报》2018,40(4):785-793

综合采用地质地貌调查、探槽开挖及OSL测年等,对离日喀则市最近的拉堆—乃东和毕定—甲舍拉断裂的活动性进行研究,结果表明:拉堆—乃东断裂在距今约3万年前停止了活动,毕定—甲舍拉断裂则至少在5万年前停止了活动,即二者自晚更新世晚期已不再活动——不属于全新世活动断裂,这与部分学者认为拉堆—乃东断裂为全新世活动断裂的结论不同。研究获得的最新断层活动资料可为该地区的地震预测提供科学依据。  相似文献   

基于高通量测序方法分析荣成月湖潮间带趋磁细菌多样性     

张文燕  潘红苗  董逸  杜海舰  陈一然  吴龙飞  肖天 《海洋科学》2019,43(3):1-10

荣成月湖是一个典型天然潟湖,潮间带沉积物中存在多种形态趋磁细菌。通过Roche454高通量测序平台,对沉积物样品(B_S)和磁收样品(B_M)进行16SrRNA基因高通量测序,认识荣成潮间带沉积物的细菌群落结构,并了解趋磁细菌多样性及系统进化地位。研究结果表明沉积物样品中主要的细菌类群为δ-变形菌纲,占总细菌数的26.4%,其次是γ-变形菌纲和α-变形菌纲;而磁收样品中细菌多样性和种类明显降低,以α-变形菌纲占绝对优势,相对比例达72.6%。在磁收样品和沉积物样品分别发现了1 612条和186条reads与趋磁细菌相关,分别占细菌总数的5.76%和0.85%,磁收样品中趋磁细菌数是沉积物样品的6.8倍。对两个样品中获得的趋磁细菌序列进行系统进化分析,发现这些序列多数属于变形菌门的α-变形菌纲,以趋磁球菌占绝对优势,少数属于δ-变形菌纲,与多细胞趋磁原核生物亲缘关系最近。海洋趋磁螺菌属仅在B_M样品中检出,趋磁弧菌属在B_M样品优势度高于B_S样品,而多细胞趋磁原核生物和趋磁螺菌属在B_S样品中优势度更高。通过分析样品间的差异OTUs,认为荣成潮间带沉积物中可能存在大量未知的趋磁细菌新类群。研究结果为下一步培养和开发趋磁细菌这一功能菌群,发现趋磁细菌新类群及趋磁细菌生态功能提供了基础资料。  相似文献   

长江三角洲蓝图重绘的基础科学问题:进展与未来研究     

汪亚平  贾建军  杨阳  周亮  冯威  高建华  魏稳  李占海  史本伟  高抒 《海洋科学》2019,43(10):2-12

在全球气候变化和人类活动影响加剧的背景下,作为河口海岸重要子系统的三角洲正在发生快速变化。长江三角洲地处长江入东海交汇处,是中国最重要的经济核心区之一,对邻近区域乃至整个长江经济带经济社会发展都起着重要作用。由于全球变暖、海面上升和强烈人类活动引发了三角洲系统状态转换,因此以往基于恒定系统状态而获得的有关长江三角洲的认识已不能满足未来需求,迫切需要对未来海面变化、极端事件、流域与河口工程影响下的三角洲物质循环条件、物理过程、地貌冲淤演化、源-汇格局调整等科学问题进行深入研究。在三角洲系统行为、未来演化趋势的预测能力建设中,应重视从海面到海底的综合立体观测系统的发展,以获取关键数据;基于三角洲系统的时、空演化特征,建立三角洲本征态和衍生态的谱系理论。未来需针对系统状态转换而调整原先的经济社会发展模式,以便保护自然资源、重建生态系统,更好地支撑长江经济带发展,重绘长江三角洲发展蓝图。  相似文献   

Satellite-based monitoring and statistics for raft and cage aquaculture in China’s offshore waters     

《International Journal of Applied Earth Observation and Geoinformation》2020

Based on Landsat 8 remote sensing images, a combination of an unsupervised classification algorithm and artificial review was used to extract areas for Chinese offshore raft and cage aquaculture in 2018. The results of the extraction showed that China’s 2018 coastal zone raft aquaculture area comprised 194,110 ha, of which the province having the largest raft aquaculture area was Jiangsu (28.77 %), followed by Fujian (20.42 %) and Shandong (13.11 %). The cage aquaculture area covered 57,847,799 square meters, of which the provinces with the largest cage aquaculture area were Fujian (64.81 %), Guangdong (17.45 %), and Liaoning (5.63 %). In addition, by combining high-resolution remote sensing image visual interpretation and field investigation, the classification of 1200 sample points in four regions was determined, and the accuracy of the aquaculture area extraction was found to be 87.35 %. The extraction results can be used not only to evaluate China’s aquaculture production but also offer significant reference value for scientific planning related to sea use, ecological environmental protection, and marine disaster prevention and mitigation.  相似文献   

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections     

Ching-Yi Tsai  Keh-Chyuan Tsai  Chao-Hsien Li  Chung-Che Wu  Ker-Chun Lin  Sheng-Jhih Jhuang 《地震工程与结构动力学》2020,49(13):1344-1362

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.  相似文献   

Strong slope-aspect control of regolith thickness by bedrock foliation     

Jordan D. Leone  W. Steven Holbrook  Clifford S. Riebe  Jon Chorover  Ty P.A. Ferré  Bradley J. Carr  Russell P. Callahan 《地球表面变化过程与地形》2020,45(12):2998-3010

The porous near-surface layer of the Earth's crust – the critical zone – constitutes a vital reservoir of water for ecosystems, provides baseflow to streams, guides recharge to deep aquifers, filters contaminants from groundwater, and regulates the long-term evolution of landscapes. Recent work suggests that the controls on regolith thickness include climate, tectonics, lithology, and vegetation. However, the relative paucity of observations of regolith structure and properties at landscape scales means that theoretical models of critical zone structure are incompletely tested. Here we present seismic refraction and electrical resistivity surveys that thoroughly characterize subsurface structure in a small catchment in the Santa Catalina Mountains, Arizona, USA, where slope-aspect effects on regolith structure are expected based on differences in vegetation. Our results show a stark contrast in physical properties and inferred regolith thickness on opposing slopes, but in the opposite sense of that expected from environmental models and observed vegetation patterns. Although vegetation (as expressed by normalized difference vegetation index [NDVI]) is denser on the north-facing slope, regolith on the south-facing slope is four times thicker (as indicated by lower seismic velocities and resistivities). This contrast cannot be explained by variations in topographic stress or conventional hillslope morphology models. Instead, regolith thickness appears to be controlled by metamorphic foliation: regolith is thicker where foliation dips into the topography, and thinner where foliation is nearly parallel to the surface. We hypothesize that, in this catchment, hydraulic conductivity and infiltration capacity control weathering: infiltration is hindered and regolith is thin where foliation is parallel to the surface topography, whereas water infiltrates deeper and regolith is thicker where foliation intersects topography at a substantial angle. These results suggest that bedrock foliation, and perhaps by extension sedimentary layering, can control regolith thickness and must be accounted for in models of critical zone development. © 2020 John Wiley & Sons, Ltd.  相似文献   

Streamflow elasticity,in a context of climate change,in arid Andean watersheds of north-central Chile     

Cristián Barrera  Jorge Núñez Cobo  Maxime Souvignet  Jorge Oyarzún 《水文科学杂志》2020,65(10):1707-1719

ABSTRACT

Based on a future temperature increase of 0.5°C and precipitation decrease of 25%, the climate elasticity of streamflow to precipitation and temperature changes in 12 Andean watersheds of the Coquimbo Region, north-central Chile, was assessed. Also, the possible relationships between this elasticity and specific physiographic characteristics of the watersheds (area, average elevation, slope distribution, terrain roughness, slope orientation, vegetation cover) were studied. Climate elasticity of streamflow ranged between 0 and 2.8. Watersheds presenting higher elevations, with a fairly well-balanced distribution of slope exposure tend to exhibit lower elasticity, which could be explained by the contribution of snowfall to the hydrological regime, more significant in those watersheds. Results should be considered when downscaling climate model projections at the basin scale in mountain settings. Finally, uncertainties in the approach, given by factors such as streamflow seasonality, data availability and representativeness and watershed characteristics, and therefore the scope of the results, are discussed.  相似文献   

Transient streambed hydraulic conductivity in channel and bar environments,Loup River,Nebraska     

Jesse T. Korus  Wilhelm P. Fraundorfer  Troy E. Gilmore  Kelsey Karnik 《水文研究》2020,34(14):3061-3077

Streambed hydraulic conductivity (K) and vertical K (K _v) are key controls on groundwater and surface water exchange and biogeochemical fluxes through the hyporheic zone, but drivers of transient hydraulic properties in different fluvial environments are poorly understood. This study combines hydrogeology, geophysics, and sedimentology to reveal mechanisms of K and K _v transience in the upper 0.5 m of a sandy streambed during low discharge. Hydraulic tests (44 slug tests, 130 falling-head permeameter tests) and 130 grain-size analyses were repeated three times over 8 weeks on a 1,200 m² grid spanning: (a) a channel with continuously flowing water and mobile bed load; (b) an adjacent mid-channel bar that was stationary and infrequently submerged. Aerial photographs and ground-penetrating radar show scour and complete reworking of fluvial sediments in the channel. Bar sediments below the water table remained immobile, but infrequent flows of moderate discharge reworked the uppermost few centimetres of the bar top. Despite differences in sediment mobility and stream flow characteristics across environments, K and K _v exhibited order-of-magnitude differences in spatial heterogeneity and temporal variability in both the channel and bar. Mean K and K _v values in the channel were comparatively stable over time. In the immobile bar, mean K declined 20% and K _v declined 26% after increased discharge temporarily inundated the bar. Grain-size distributions were steady across both environments over time, but repeat geophysical surveys of the bar show a decrease in electrical conductivity, likely from porosity reduction. These findings suggest that sediment dynamics and stream flow characteristics in different streambed environments are important drivers of K transience during low discharge conditions. Specifically, pore clogging can be an important mechanism of transience over short durations (weeks to months) in immobile sediments subject to infrequent flows and minor reworking.  相似文献   

基于岩体塑性位错理论的龙门山区域构造系统演化过程     

师皓宇  黄辅琼  马念杰  王永建  马骥  邹光华  彭瑞 《地质学报》2020,94(12):3581-3589

青藏高原对四川盆地的挤压作用导致了龙门山断裂带的形成及其山脉的隆起。本文以龙门山附近区域板块运动以及深部岩体力学特性为背景，采用FLAC3D软件模拟再现了时间跨度为700万年的龙门山区域构造系统演化过程。研究结果表明：在板块运动作用下，F1、F2和F3断层依次形成，贯通的断层对地表的抬升具有较强的控制作用，当断层贯通于地表后，龙门山及其以西的川西高原持续隆起，平均抬升速率约为138mm/yr，而龙门山断裂带以东的川西坳陷只有较小的抬升量，从而导致川西高原抬升8996 m, 致使该区域产生6000m左右的落差，模拟的地形特征与目前的龙门山地形地貌基本相似。依据模拟结果与实测资料，绘制了龙门山断裂带形成及其附近区域地形地貌的演化过程图，呈现了板块挤压、断层塑性位错、地表侵蚀和沉积作用等因素共同作用对地形地貌的塑造过程。  相似文献   

断层附近地应力扰动带宽度及其影响因素   总被引：3，自引：3，他引：0  

翁剑桥  曾联波  吕文雅  刘奇  祖克威 《地质力学学报》2020,26(1):39-47

在建立正断层模型的基础上，利用三维有限元数值模拟方法研究了断层附近地层中的地应力变化规律。其结果表明，由于断层活动，在断层附近普遍发育应力扰动带；在应力扰动带范围内，地应力方向和大小发生明显的变化，断层中部附近应力值普遍较低，而断层端部的应力值通常异常增大。应力扰动带的分布范围主要受断层规模的控制，与断裂带的岩石力学性质、断层走向、断层面形态和边界应力条件等因素也密切相关。随断层长度和断距逐步增大，应力扰动带的宽度相应增加。断裂带的岩石越破碎，其岩石弹性模量越低，断层对地应力的影响宽度越大。断层走向与区域最大水平主应力方向越接近垂直、断距与断层长度的比值越大，区域内的差应力越大，则扰动带宽度与断层规模的比值也越大。选择渤海湾盆地BZ-X油田进行验证，在建立油田实际三维地质模型基础上，根据边界应力条件，利用三维有限元方法对沙河街组二段的地应力分布进行了数值模拟计算。根据断层周围的地应力变化，确定了应力扰动带的分布范围，断层附近应力扰动带宽度的分布规律与正断层模型分析结果相一致。   相似文献